DIGGERS™ Lacquer Thinner
DIGGERS™ Lacquer Thinner is a specially formulated lacquer and varnish thinner and cleaning solvent.
TYPICAL USES
- Thinning most lacquers and varnishes
- Cleaning solvent for lacquer and varnish
- Removes chewing gum, some inks, waxes, PVC adhesives and other plastics
- Automotive finishes
FEATURES
- Improves paint consistency
- Reduces the risk of imperfections
- Fast drying
- High gloss finish
How to use DIGGERS™ Lacquer Thinner
For Thinning Lacquer or Varnish
1. Ensure the surface to be painted is clean, dry, and prepared according to the paint manufacturer’s directions.
2. Follow the paint manufacturer’s recommended ratio of thinner to paint. As a general guide, use one part thinner to three parts paint.
3. Make sure all mixing and application equipment is clean and dry.
4. Add the thinner to the paint slowly while stirring, and mix thoroughly before application.
5. Apply the mixture using a spray gun or brush.
For Stripping Lacquer or Varnish
1. Use a tightly woven, non-absorbent cloth and wet it with DIGGERS™ Lacquer Thinner.
2. Wipe the surface vigorously until the lacquer or varnish has been removed.
For General Cleaning
1. Wet a lint-free cloth with DIGGERS™ Lacquer Thinner.
2. Wipe the surface to remove chewing gum, certain inks, waxes, PVC adhesives, and some plastics.
Safety Tip: Always wear suitable protective clothing, gloves, and eye/face protection when using this product.
Now available at Bunnings Warehouse, Mitre10 & all good hardware stores.
Frequently Asked Questions (FAQs)
Q: What is DIGGERS™ Lacquer Thinner used for?
A: It is designed for thinning most lacquers and varnishes, cleaning lacquer and varnish equipment, and removing substances such as chewing gum, inks, waxes, PVC adhesives, and certain plastics.
Q: Can I use this product for any type of paint?
A: It’s specifically formulated for use with lacquers and varnishes. Always follow the paint manufacturer’s recommendations before use.
Q: How much thinner should I add to paint?
A: The correct ratio depends on the paint manufacturer’s instructions. As a general guide, use one part thinner to three parts paint.
Q: Can I use DIGGERS™ Lacquer Thinner for cleaning?
A: Yes, it can be used as a cleaning solvent to remove residues like gum, ink, wax, and adhesives from hard surfaces.
Q: Does it leave residue after use?
A: No, DIGGERS™ Lacquer Thinner evaporates quickly and leaves no residue, helping achieve a smooth, high-gloss finish.
Q: What safety precautions should I take?
A: Always wear protective gloves, eye/face protection, and suitable clothing. Use the product in a well-ventilated area and follow all safety instructions on the label. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
