DIGGERS™ PROGRADE Graffiti Remover
DIGGERS™ PROGRADE Graffiti Remover Industrial Strength is suitable for removing stubborn graffiti from almost any hard surface without damaging the original underlying paint.
DIGGERS™ recommend a spot test prior to using this product.
TYPICAL USES
- Removes stubborn graffiti or overspray from almost any surface without damaging the original underlying paint
- Suitable for use on: Painted Surfaces, Perspex, Reflective Street Signs, Glass, Aluminium, Stainless Steel, Variable Message Boards, Printed Vinyl, Laminex, Carpet & Upholstery, Auto Duco
FEATURES
- Biodegradable and environmentally sustainable
- Non-flammable and non-corrosive
- Will not fog or streak Perspex, Laminex, reflective street signs or glass
- Mild lemon fragrance
CAUTION: DO NOT USE ON HOT POLYCARBONATE.
HOW TO USE DIGGERS™ PROGRADE GRAFFITI REMOVER
1. Prepare the area
Work in a well-ventilated space and remove any loose dirt or debris from the surface.
2. Test first
Always perform a spot test on a small, inconspicuous area before full application to ensure the surface is compatible.
3. Apply the remover
Spray or apply the product directly onto the graffiti or overspray. Ensure the surface is fully covered.
4. Let it penetrate
Allow the remover to sit for a few minutes to break down the paint or markings.
5. Wipe or scrub
Gently wipe, scrub, or rinse the area with a cloth, sponge, or soft brush. Repeat application on stubborn graffiti if necessary.
6. Rinse and finish
Rinse the surface with water to remove any remaining product residue. Check the area to ensure all graffiti is removed and repeat if needed.
Frequently Asked Questions (FAQs)
Q: What surfaces can I use this graffiti remover on?
A: It’s safe on painted surfaces, stainless steel, variable message boards, Perspex, printed vinyl, Laminex, carpet, upholstery, glass, aluminium, and auto duco. Always do a spot test first.
Q: Will it damage the underlying paint?
A: No. DIGGERS™ PROGRADE Graffiti Remover is designed to remove graffiti without affecting the original surface or paint. Always do a spot test first.
Q: Is this product safe to use indoors?
A: Yes, it’s water-based, non-flammable, and non-corrosive. Ensure adequate ventilation when using indoors.
Q: Does it leave streaks or fog surfaces?
A: No. It will not fog or streak Perspex, Laminex, reflective street signs, or glass.
Q: How should I apply the remover?
A: Spray or apply directly onto the graffiti; let it penetrate for a few minutes, then wipe, scrub, or rinse. Repeat for stubborn marks.
Q: Do I need protective gear?
A: Gloves are recommended to avoid skin contact. Eye protection is advised if there’s a risk of splashing.
Q: Can I use it on aluminium or stainless steel?
A: Yes, it’s safe on most metals, but always test on a small, inconspicuous area first.
Q: Does it have a strong smell?
A: No, it has a mild lemon fragrance for a more pleasant application experience.
Q: How should I store the product?
A: Keep it in its original container, tightly sealed, out of reach of children and pets.
