DIGGERS™ Enamel Thinner
DIGGERS™ Enamel Thinner is specially formulated for thinning enamel paints for spraying as well as surface preparation and cleaning.
TYPICAL USES
- Thinning industrial and automotive enamels including paving paints
- Removing wax and grease prior to spraying
- Stripping enamel paint
- Cleaning enamel over-spray
FEATURES
- Improves paint consistency
- Allows paint to acquire optimum film characteristics
- Fast drying
- Professional gloss finish
How to use DIGGERS™ Enamel Thinner
For Thinning Enamel Paint
1. Ensure the surface to be painted is clean, dry, and prepared according to the paint manufacturer’s directions.
2. Follow the paint manufacturer’s recommended ratio of thinner to paint. As a general guide, use one part thinner to three parts paint.
3. Make sure all mixing and application equipment is clean and dry.
4. Add the thinner to the paint slowly while stirring, and mix thoroughly before application.
5. Apply the mixture using a spray gun or brush for best results.
For Stripping Enamel Paint
1. Wet a tightly woven, non-absorbent cloth with DIGGERS™ Enamel Thinner.
2. Wipe the surface vigorously until the enamel paint or overspray has been removed.
For Cleaning Equipment
1. After painting, clean brushes, spray guns, and other application tools with DIGGERS™ Enamel Thinner or a spray gun wash solvent.
Safety Tip: Always wear suitable protective clothing, gloves, and eye/face protection when using this product.
Now available at Bunnings Warehouse, Mitre10 & all good hardware stores.
Frequently Asked Questions (FAQs)
Q: What is DIGGERS™ Enamel Thinner used for?
A: It’s designed for thinning industrial and automotive enamel paints (including paving paints), stripping enamel paint, cleaning enamel overspray, and removing wax and grease before painting.
Q: Can I use it with any type of paint?
A: No. DIGGERS™ Enamel Thinner is specifically formulated for enamel paints. Always check the paint manufacturer’s instructions before use.
Q: How much thinner should I add to enamel paint?
A: Follow the paint manufacturer’s guidelines. As a general guide, use one part thinner to three parts paint.
Q: Can I use this product to clean painting equipment?
A: Yes. It’s ideal for cleaning brushes, spray guns, and other equipment after applying enamel paint.
Q: Does DIGGERS™ Enamel Thinner dry quickly?
A: Yes. The fast-drying formula helps achieve a professional, high-gloss finish.
Q: What safety precautions should I take when using this product?
A: Always wear protective gloves, eye/face protection, and suitable clothing when handling. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Follow all safety directions on the product label.
