DIGGERS™ Eco In-Ground Timber Protecta
DIGGERS™ Eco In-Ground Timber Protecta is a non hazardous ‘creosote alternative’ that provides a tough bitumen coating to improve protection against moisture and deterioration on timber and masonry surfaces.
TYPICAL USES
Increases the life of building materials in outdoor, below ground applications by sealing toxins in and keeping moisture out. Typically used on:
- Fences, veranda posts and sleepers
- Garden stakes, logs, poles and retaining walls
FEATURES
- Easy to apply with brush, spray, roller or by dipping
- Contains ingredients that help inhibit mould, rot and other corroding effects on timber and masonry surfaces
- BFA Registered Product – certified for use on organic farms
- Contains no hazardous ingredients (as defined by the Australian Safety and Compensation Council)
- Safer alternative to common timber treatments
- Flexible UV coating which expands and contracts with the timber
How to use DIGGERS™ Eco In-Ground Timber Protecta
1. Thoroughly shake and stir the product before and during application.
2. Clean any dirt or dust from the timber surface.
3. Apply with a brush, roller, or by dipping. If the brush clogs during use, soak it in DIGGERS™ Mineral Turpentine.
4. Apply two coats, allowing one hour between coats. Typical coverage is 8–10 m² per litre per coat.
5. For posts, extend the coating at least 10 cm above ground level.
6. Clean equipment or spills with water while still wet. Dried spills can be removed with DIGGERS™ Mineral Turpentine.
7. To paint over, allow the coating to dry completely and use a water-based acrylic paint.
Safety Tip: Always wear suitable protective clothing, gloves, and eye/face protection when using this product.
Now available at Bunnings Warehouse, Mitre10 & all good hardware stores.
Frequently Asked Questions (FAQs)
Q: What is DIGGERS™ Eco In-Ground Timber Protecta used for?
A: It provides a tough bitumen coating to protect timber and masonry from moisture, mould, rot, and other corroding effects, increasing the life of outdoor, below-ground building materials.
Q: What surfaces can I treat with it?
A: Typically used on fences, veranda posts, sleepers, garden stakes, logs, poles, and retaining walls.
Q: How should I apply the product?
A: Shake and stir thoroughly, clean the surface, and apply with a brush, roller, or by dipping. Apply two coats, allowing one hour between coats.
Q: Can I paint over the coating?
A: Yes. Allow the coating to dry completely and use a water-based acrylic paint.
Q: How do I clean up spills or equipment?
A: Clean equipment and wet spills with water. For dried spills, use DIGGERS™ Mineral Turpentine.
Q: Are there any safety precautions?
A: Always wear suitable protective clothing, gloves, and eye/face protection when using this product.
Q: How much area does one litre cover?
A: Typical application rates are 8–10 m² per litre per coat.
