DIGGERS™ Rust and Stain Cleaner
DIGGERS™ Rust and Stain Cleaner is a naturally occurring biodegradable organic product which effectively removes stains and cement residue. It is a mild bleaching agent that also rejuvenates tired looking timber.
TYPICAL USES
- Rust removal – kitchens, appliances, tools and plumbing fixtures
- Stain removal – fuel stains, blood and bore stains
- Heavy duty timber and masonry cleaner
- Rejuvenates tired or aged timber
- Textile bleaching
FEATURES
- Will mildly bleach most surfaces
How to use DIGGERS™ Rust & Stain Cleaner
1. Test first
Always test a small, inconspicuous area before full application.
2. Cleaning Brick Surfaces
- Wet bricks thoroughly with water.
- Dissolve 100g of DIGGERS™ Rust & Stain Cleaner in 1 litre of cold water.
- Brush solution over the bricks and let soak for a few minutes.
- Hose off with water.
3. Removing Bore Stains
- Prepare a solution of 100g per 1 litre of cold water.
- Brush onto the stain and let soak for 5–10 minutes without letting it dry.
- Hose off with water.
4. Rejuvenating Aged Timber
- Mix 100g in 1 litre of water and mop over the surface.
- Let soak for a few minutes, scrub with a stiff brush, then hose off with water.
5. Removing Stains from Clothes
- Mix 2 tablespoons in 2 litres of water.
- Soak stains for 15 minutes, then rinse.
Important Notes:
- Apply solution over the entire surface to avoid bleached patches.
- Do not use on painted surfaces.
- Protect surrounding metal, paintwork, and plants by wetting them first or covering with plastic sheeting; hose off immediately after use.
- Wear protective clothing, gloves, and eye/face protection.
Frequently Asked Questions (FAQs)
Q: What surfaces can I use this product on?
A: Suitable for brick, masonry, timber, and textiles. Not recommended for painted surfaces.
Q: Will it damage surrounding plants or metal surfaces?
A: It may affect nearby plants or metal surfaces, so protect them with plastic sheeting or by wetting first.
Q: Is this product safe to use indoors?
A: Always wear protective clothing, gloves, and eye/face protection. Use in a well-ventilated area.
Q: Does it require scrubbing?
A: Most stains are removed without heavy scrubbing, but a stiff brush may be used for aged timber or tough soils.
Q: Can it bleach surfaces?
A: Yes, it is a mild bleaching agent. For even results, apply solution across the entire surface.
