DIGGERS™ Anti-Mould Linseed Oil
DIGGERS™ Anti-Mould Linseed Oil is a READY-TO-USE low cost alternative to conventional decking oils – a unique product.
Internal and external trials have shown this product to provide mould and mildew resistance.
TYPICAL USES
- Natural oil for decking
- Outdoor timber sealer and protector
- Decks, fences and retaining walls
FEATURES
- Mould, mildew and water resistant
- Ready to use – no mixing required
- Reduces the greying effect of timber
- Coverage: Softwoods/ Hardwoods: 6-8/8-10m2 per litre (dependent on porosity and application technique)
- Will produce a warm, golden tone to pine and maple. Porous woods like walnut will darken considerably. Dense cabinet hardwoods will not absorb readily.
How to use DIGGERS™ Anti-Mould Linseed Oil
For New Timber:
1. Clean the surface using DIGGERS™ Timber Cleaner. Remove heavy deposits of wax and grease with DIGGERS™ Wax & Grease Remover or DIGGERS™ Mineral Turpentine.
2. Once the surface is dry, coat with DIGGERS™ Anti-Mould Linseed Oil. Allow approximately 24 hours between coats, depending on weather conditions.
3. Wipe off any excess oil with a clean lint-free cloth to prevent heavy build-up and sticky surfaces.
For Previously Coated or Weathered Timber:
1. Sand the surface to remove the previous coating.
2. Wash the surface and apply as indicated above for new timber.
Safety: Wear suitable protective clothing, gloves, and eye/face protection. Soak used rags in water to prevent spontaneous ignition and dispose of safely.
How does Linseed Oil work?
When linseed oil is applied to a porous surface it fills the pores and as it is exposed to the air it gels to form a protective film. The film is
generally impervious to water, heat, scratches and most stains.
NOTE: Timber exposed to the elements will have higher absorption rate. Soak rags in water as spontaneous ignition may occur on drying. Dispose of rags by controlled
incineration or at an approved landfill.
Frequently Asked Questions (FAQs)
Q: What surfaces can I use DIGGERS™ Anti-Mould Linseed Oil on?
A: It is suitable for decks, fences, retaining walls, and other outdoor timber surfaces.
Q: Does this product require mixing before use?
A: No, it is ready to use straight from the container.
Q: How much coverage can I expect?
A: Softwoods: 6–8 m² per litre. Hardwoods: 8–10 m² per litre, depending on porosity and application technique.
Q: Will it change the colour of the timber?
A: Yes, it produces a warm, golden tone on pine and maple. Porous woods like walnut will darken considerably, while dense cabinet hardwoods may not absorb readily.
Q: Is it water-resistant?
A: Yes, the product provides mould, mildew, and water resistance.
Q: Are there any precautions with used rags?
A: Yes, soak rags in water after use to prevent spontaneous ignition and dispose of safely.
Q: Do I need protective equipment when using this product?
A: Yes, wear suitable protective clothing, gloves, and eye/face protection.
