DIGGERS™ Xylene
DIGGERS™ Xylene is a specialty solvent for thinning and stripping sealers.
TYPICAL USES
- Thinning for solvent based acrylic (SBA) sealers
- Stripping solvent based acrylic (SBA) sealers
- Removes grease, oil and dirt
FEATURES
- High solvency power
- Mid-to-slow evaporation rate
How to use DIGGERS™ Xylene
For Thinning Sealers
1. Always follow the manufacturer’s directions when thinning solvent-based acrylic (SBA) sealers.
For Stripping Sealers
1. Test a small, inconspicuous area first before proceeding with the full surface.
2. Saturate a lint-free cloth with DIGGERS™ Xylene.
3. Wipe the surface, using a clean part of the cloth for each pass.
4. Do not use on painted surfaces or Perspex.
Safety Tip: Always wear suitable protective clothing, gloves, and eye/face protection when using this product.
Now available at Bunnings Warehouse & all good hardware stores.
Frequently Asked Questions (FAQs)
Q: What is DIGGERS™ Xylene used for?
A: It is used for thinning and stripping solvent-based acrylic (SBA) sealers and for removing grease, oil, and dirt.
Q: Can I use Xylene on painted surfaces or Perspex?
A: No. DIGGERS™ Xylene should not be used on painted surfaces or Perspex.
Q: How do I safely strip sealers with Xylene?
A: Always test on a small, inconspicuous area first. Saturate a lint-free cloth and wipe the surface, using a clean part of the cloth for each wipe.
Q: Can I thin sealers with Xylene?
A: Yes. Follow the sealer manufacturer’s directions when thinning with Xylene.
Q: Are there safety precautions?
A: Yes. Always wear suitable protective clothing, gloves, and eye/face protection when using this product. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
