DIGGERS™ Paint Stripper Domestic
DIGGERS™ Paint Stripper Domestic Formulation is a low odour, biodegradable, methylene chloride free alternative that deeply penetrates and quickly lifts paint for easy removal.
Unlike Methlyene Chloride based paint strippers, DIGGERS™ Paint Stripper Domestic Formulation will not make the paint blister, but will gently soften the paint so that it can be scraped off.
TYPICAL USES
- Suitable for domestic, industrial, automotive and marine applications
- Effective on oil and water based paints, acrylics, varnishes and epoxies
- Timber, metal and masonry surfaces
- Indoor/outdoor use
FEATURES
- Water wash-up.
- Biodegradable.
- Low odour.
- Gel formula for vertical surfaces (thixotropic).
- Works in 30 minutes and stays wet for 24 hours – allows you to complete a whole project in a single application.
- Methylene chloride free – contains no flammable ingredients.
- Covers approximately 2m² per litre.
Please note: The time required for full penetration of the stripper into the painted surface will depend on the the quality of the paint and the number of coats to be removed.
How to use DIGGERS™ Paint Stripper Domestic
1. Shake or mix well before use
Always shake or mix the product thoroughly before applying.
2. Apply a thick coat
Use a paint brush or roller to apply a thick coat of DIGGERS™ Paint Stripper Domestic to the surface. The product will begin to work after approximately 30 minutes as it penetrates and softens the paint.
3. Remove softened paint
Once the paint has softened, use a paint scraper or steel wool to remove it before it rehardens. For delicate timbers, use a non-metallic scourer to prevent damage.
4. Reapply if necessary
If paint remains after scraping, apply a second coat and repeat the process.
5. Clean the surface
Wash the surface with water to remove residue. If the surface is affected by water or at risk of swelling (e.g. timber), use DIGGERS™ Methylated Spirits instead. Allow the surface to dry thoroughly before redecorating.
Note: Do not use on plastic, rubber, linoleum or fibreglass surfaces. Do not use hot air guns or torches with paint stripper.
Now available at Bunnings Warehouse, Mitre10 & all good hardware stores.
Frequently Asked Questions (FAQs)
Q: What types of paint can DIGGERS™ Paint Stripper remove?
A: It is effective on oil and water-based paints, acrylics, varnishes, and epoxies.
Q: What surfaces can it be used on?
A: It is suitable for timber, metal, and masonry surfaces in both indoor and outdoor applications.
Q: How long does it take to work?
A: The stripper begins to work after approximately 30 minutes and stays wet for up to 24 hours, allowing you to complete a whole project in one application.
Q: Does the paint need to blister before removal?
A: No. Unlike Methylene Chloride-based paint strippers, DIGGERS™ Paint Stripper softens the paint instead of blistering it.
Q: Can I use it on plastic or fibreglass?
A: No. It should not be used on plastic, rubber, linoleum, or fibreglass surfaces.
Q: What should I use to clean the surface after stripping?
A: Wash with water to remove residue, or use DIGGERS™ Methylated Spirits if water may damage or swell the surface.
Q: How much area does one litre cover?
A: One litre covers approximately 2m².
